In the calculation of the guide rails in the case of earthquakes, the mass of the empty car was implemented without travaling cables and compensating ropes / chains. According to EN 81-77: 2018
In the guide rail dialog, is the choice of buffer type now implemented by the click in the field impact factor k1. If buffers are selected in the actual order, the type will be taken from the buffer module. If no buffer has been selected in the actual order, the buffer type can be free selected. The max. impact factor k1 is determined by the safety gear type and buffer type. According to table 14 from EN81-20, point 188.8.131.52
We had to integrate the latest version of the programming language PHP 7.x. We've tested all the features, if there are some problems, please contact info(at)liwetec.com. Many Thanks. Yours sincerely the EP team
Rails calculation - enter beams forces Car guide rail calculation - load type catch, drive, charged If you have already entered and calculated the beams in the bemas calculation, the beams symbol next to the input field also appears. Now you can click and accept all beams forces that also act as additional load on the rail. The additional load adapts automatically. A detailed description can be found in the help file “Guide rails car” – tab “Load type”. Counterweight guide rail calculation - load type catch, drive/jumping The possible input of the carrier forces at the counterweight rails is equivalent to above. A detailed description can be found in the help file “Guide rails counterweight” – tab “Load type”.
Beams calculation - New info button Blue information button For standard profiles, you can display details for this profile by clicking on . All details will be displayed in a new browser window. Red pencil If you would like to add a profile manually, first select “User defined” under profile and then click on . Red cross In addition, there is a new delete icon. If you would like to delete a carrier or a force just click on . Beams calculation - new design for the forces input The entry of forces has been simplified and made clearer. The following symbols have been introduced: ≅ Forces car side ≅ Forces counterweight side ≅ Forces beams A detailed description can be found in the help file "Beams" - tab "Forces".
Manage default order settings From now on it is possible to create and manage default orders. The default "Global standard order" is, as usual, an empty order document. From now on, however, individually customized templates can also be created. After the template has been created successfully, it is available for selection in the toolbar under "New order". A detailed description can be found in the help file "Order Creation" - Tab "Default order settings".